LORENZ

Members
  • Content count

    116
  • Joined

  • Last visited


Everything posted by LORENZ

  1. LORENZ added a post in a topic Position/STROBE/Tail LED Combo For Sale   

    What brand are they?
    • 0
  2. LORENZ added a post in a topic Nice 912 powered Avid for sale   

    Sold in 2013, crashed in 2014?  How'd you guys come across that news piece and put things together from a 4 year old post?  That's some sleuthing. 
    • 0
  3. LORENZ added a topic in For Sale and wanted, you got it, I want it   

    670 Rotax Rick 92hp NEW Motor $8000 San Diego
    New 670, fresh from Rotax Ricks test bench.  

    - Zero hours never mounted 

    - log book included

    - Pipe included dyno tuned

    - 92 hp dyno tuned

    - Bronz colored Bing 54 Carbs jetted and dyno'd properly 

    - no need to turn over your existing 582 for the case, my 582 only had 21 hours on it when I shipped it over to Rotax Rick for the 670 1 piece crank, new ceramic pistons, new forged rods, and new 670 build. 

    - C gear box is almost new with 21 hours on it and gone over with new motor build

    - Ducati Dual ignition

    - Rotax starter 

    - 670 Rotax stator

    Here's the prices if you bought from Rotax Rick and California Power Supply:  $9100 total [$4750 670 Rotax+$725pipe+$1500 Cbox + $575 starter + $350 stator + $350 Ducati ignition+ $850 Bing carbs]

    Calling or texting is best, no PM's on the forum please, I won't check back enough to give you a timely reply. Use text or a call and I'll get back quickly 

    Sean
    (619) 300-3351
    • 0 replies
    • 892 views
  4. LORENZ added a post in a topic Aluminum plate is at an all time low $$   

    We're is he located?
    • 0
  5. LORENZ added a post in a topic Please Input on rotax ricks rebuilds   

    I've been back and forth on selling my brand new Rotax Rick 670 and jumping ship for the 912 conversion. Talk me out of it. 
     
     
    • 0
  6. LORENZ added a post in a topic Yamaha RX1 Engines   

    For those that weren't aware the 2016 year 582 Rotax 2 stroke aircraft motor is very close to the same motor as the 1999 model year 670 Rotax minus cylinder bore, rotary valves and the 1 piece crank. The cases are almost identical. The 670 Ski-Doo Rotax is closer to the 582 aircraft Rotax than the discontinued 618 aircraft Rotax was. Some say they discontinued the 618 from the aircraft line beachside it was too similar to the $20,000 912 four stroke Rotax that came market in the same generation. 
    It would have been amazing to have had Rotax continue the 2 stroke aviation line with direct injection. It would for sure cannibalize the 912 four stroke line of engines and the current bottom line net income. I don't blame them from a business perspective. 
    • 0
  7. LORENZ added a post in a topic Yamaha RX1 Engines   

    Here'a a quick google search of the RX1 vs the 670. The 670 HO was legendary. 
    *********
    All 670s are not created equal. the 99 670 H.O. was the last rotary valve motor that Ski-doo would put in a sled. the zx chassis would not fit the rotary motors. The engineers at doo built that motor as the last hurah for the rotary and pulled out all the stops. Consider that it dynoed at 138 hp, nearly the same as a stock 2002 reed valve 800 doo. The pipe on the H.O. was a seperate part number only for the H.O. The only aftermarket pipes that would make more power were twin pipes. The ignition had a different advance curve. The clutching was nearly perfect out of the box. The standard 670 was nothing like the H.O. Nothing was quicker untill polaris came with the xc 700 and it would still beat that or the 2001 srx in 660'. I owned #243 Toni H. 99 670 H.O. and after that a 2002 mxzx 800.
    **************
    Yamaha suspension technology, that's funny. I had a 03 rx1 as well ad a 07 nytro. I would take the ride of my 97 mxz670 any day over those. the only thing that the yamaha has for an advantage would be flatter cornering. the rotary valve engines sit high in the chassis because of the intake . yamaha leaves a lot on the table as far as engine and clutching.

    i have owned 4 r.v engines that were all bulletproof. 10k+ on two of them. some people are installing them into zx and rev chassis sleds . the ho 670 is a reliably powerfull mill.
    polaris introduced their 700, which was quicker than a standard 670. the ho was a response to that engine. it was fast. the 03 firecats which are the fastest are incredibly fast . the ho actually had quicker drag times.
    • 0
  8. LORENZ added a post in a topic Yamaha RX1 Engines   

    I'm not sure if this 670 tune is full out race spec?
    • 0
  9. LORENZ added a post in a topic Yamaha RX1 Engines   

    The 670 is no joke, it out pulls the 912 when the 670 is detuned for aircraft use. I can see the 670 out pulling the Yamaha RX1 in a snow mobile race tune. 
     

    • 0
  10. LORENZ added a post in a topic Rotary valve oil overflow   

    If it's fuel and oil getting past the seal from the crank case your running your engine lean. We know what happens when 2 strikes go lean. Kind of a scary think to have happening. 
    • 0
  11. LORENZ added a topic in Avidfoxflyers General Hangar   

    Strobe LED replacement for Avid's stock units
    I have these Wheelands and need a couple lenses for them. Rather than replacing the uber expensive glass lenses, I figured that after 25 years there would be some cheap LED direct plug and play eBay cheap replacements available?  
     
    Who has a lead on cheap LED replacement?
    The photos are from a bird that I walked by at Oshkosh this year, I have and same strobes and controller mounted behind the seat, and have 2 broken lenses. My bulbs look to be in good condition. 
    • 0 replies
    • 810 views
  12. LORENZ added a post in a topic WHO listed parts and 800x6 TIRES For Sale?   

    They came in and I'm happy. I ordered from that eBay above, the tires and tube are from different sellers. The born on date stamps are from 2015 and are about a year old stock. The rubber looks pliable and like new. 
    • 0
  13. LORENZ added a post in a topic Hunting with your Avid 2016   

    Drop a link to that thread For the lazy Ed. I'm interested in learning more about those VG's you have and how they compare to other brands. If they're the "good" one, I'll probably pick them up from you. 
    • 0
  14. LORENZ added a post in a topic Hunting with your Avid 2016   


     
    Are those speed wings?  I'm on the hunt for some STOL wings for my girl, but, if your landing in the back country with your speed wing, I may be able to drop new wings off my want list.  What kind of stall speed and approach speeds are you seeing with those vortex generators?  Did they help a ton, they're easier to install compared to building or finding new wings 
     
    The gear looks like it's extended, what kit did you use, or are they custom one off jobbers?
    • 0
  15. LORENZ added a post in a topic Will Kitfox 4 wings fit an Avid MkIV?   

    Ed,
    I want to go slow, it's what all the cool kids are into these days. 
     
    I have Avid's Speed wings and want STOL wings. 
    • 2
  16. LORENZ added a topic in Avid Flyer General Hangar   

    Will Kitfox 4 wings fit an Avid MkIV?
    Will they fit straight across without drastic modification?
    • 11 replies
    • 1,922 views
  17. LORENZ added a post in a topic LED SHOP LIGHTS   

    Dholly for the win.... I'm officially on the prowl for the orange LED boxes. 
    • 0
  18. LORENZ added a post in a topic San Diego knowledge, help, and motivation wanted to bring my girl back from hibernation   

    Back in in her glory days with the previous owner builder  
     

    • 0
  19. LORENZ added a topic in Avidfoxflyers General Hangar   

    San Diego knowledge, help, and motivation wanted to bring my girl back from hibernation
    I need some finishing help in San Diego. I'm hoping for Avid/Kitfox builder knowledge. I need some keen eyeballs to help me go over my plane that has been sitting well stored and preserved since '94. She only has 21 hours on her by the previous owner builder.
    I'm in the middle of replacing my 582 with a 670 along with new fuel lines and fitting. Test run may come as early as this month. New tires are ordered and rubber bits have been replaced.  iPad integration is in the plans  
    I'd be more than happy to pay for an extra set of eyeballs and knowledge while wrenching on her. 
     
    Sean @ lorenzindustries . com
    (619) 300 -    3351
     
     

    • 2 replies
    • 637 views
  20. LORENZ added a post in a topic WHO listed parts and 800x6 TIRES For Sale?   

    Mains
     
    They look to be the same size stamped on the side as my original AVID tires.  It was mentioned they're a little smaller, how much extra room am I going to have in the wheel pants?
     
    I think I'll be ordering that set from that eBay link, unless you guys see a problem?  Thanks for the good find gents.
     

    • 0
  21. LORENZ added a post in a topic WHO listed parts and 800x6 TIRES For Sale?   

    Another look
    • 0
  22. LORENZ added a post in a topic WHO listed parts and 800x6 TIRES For Sale?   

    Help me out gents are those eBay tires direct replacements for my avid MKIV and wheel pants?  I think I'm going to put the tail dragger gear back on her.  She need some new shoes as these ones are dry rotted. 
    • 0
  23. LORENZ added a post in a topic Avid Mark IV - only 26 hours   

    My MkIV has 21 hours in the Hobbs meter. No were near the 40 hours fly off time. I'm not familiar with all the phases can you explain them. 
    • 0
  24. LORENZ added a topic in Avidfoxflyers General Hangar   

    Avid MkIV bubble doors, who makes then
    I
     
     
     
    I'm really hoping somebody makes them still, or hoping the Kitfox 4 doors are the same shape and size?  Who has the lead I'm looking for?  Saw these one on a Barnstormer ad that isn't mine  
     
    Sean
    • 11 replies
    • 2,852 views
  25. LORENZ added a post in a topic Big collection of Avid parts in Idaho   

    Tell me about the speed wing extensions.  Ill be hunting up in Idaho later this fall. You have my #.
    • 0