Justin

Members
  • Content count

    27
  • Joined

  • Last visited


Community Reputation

4 Neutral

About Justin

  • Rank
    Member

Justin's Activity

  1. Justin added a post in a topic Please Input on rotax ricks rebuilds   

    Well I ended up going with rotax Rick and am very pleased with his rebuilds. So far the motor is doing good and performing amazing he is very very helpful with any questions or concerns he will help you with anything he can so unfortunately I can't help you with bill Larson but I have heard good things about him as well if you have any specific question feel free to ask 
    • 0
  2. Justin added a post in a topic Rotax 582 front cylinder EGT HIGH   

    Thanks for all the info guys I have lots to try now I determined that the probes are reading acuratly this morning so I know now that's it's a definite carb or engine related problem I will give these things a try and see what I come up with this is some of the temps at 5800 with front carb on factory clip spot and back carb 2nd clip from top 



    • 0
  3. Justin added a post in a topic Rotax 582 front cylinder EGT HIGH   

    Well I used rotax Rick and I have asked him a few questions before I ruled out what I know now he was saying it could be the jetting in the carb he said I may need to run a bigger main jet or change the needle but I feel that would do anything but mask a bigger problem I am no two stroke genius that's were I leave it up to all the amazing knowledgeable people on this site 
    • 0
  4. Justin added a post in a topic Rotax 582 front cylinder EGT HIGH   

     OK so I swap the carbs and the front cylinder still runs hotter I also swapped the EGT probe's front to rear rear to front  I also tried two analog gauges plus matching it with my EIS and everything seems to match out that the front cylinder still runs hotter all the jetting in the carburetors match and all the needle clips are the same I am at an absolute loss wondering what it could be checked the carbs  Sockets and couldn't find any air leaks. 
    Is it possible a base gasket sucking air on the front cylinder thanks 
    • 0
  5. Justin added a post in a topic Rotax 582 front cylinder EGT HIGH   

    Ya I am going to swap carbs around today and try that and also inspect the carb sockets. I did switch the probes and front still runs hotter hopefully I'll get some answers by switching the carbs thanks 
    • 0
  6. Justin added a topic in Two Strokes   

    Rotax 582 front cylinder EGT HIGH
    Can anybody please help me figure out why my completely overhauled rotax 582 blue head is running high EGTs on the front pto side cylinder back cylinder runs around 1000 to 1050 at 4500 rpm and the front wants to climb right up to 1100 and keeps on going if I let it which I have not it's got all rebuilt carbs including all jets needle clip and ECT.. any advice would be greatly appreciated I have already determined it's not gauges it is I tried analog after thinking it could be my EIS please help new motor new prop new glass panel and still on the ground 
    • 15 replies
    • 343 views
  7. Justin added a post in a topic HELP can anyone tell me what this means   

    Okay great I was In the process of putting my c box back on and ran into the fact I didn't see the shim they were so called explaining I also wandered why it says as required I guess I need to figure out how that mesurment is taken before I go any further thanks for the advice 
    • 0
  8. Justin added a topic in Two Strokes   

    HELP can anyone tell me what this means
    what does it mean on a rotax C box 3.1 put the # 16 shim on the pinion shaft as required 
    • 8 replies
    • 359 views
  9. Justin added a topic in For Sale and wanted, you got it, I want it   

    Excellent shape RK 400 clutch for c box
    Excellent shape RK 400 clutch with new clutch shoe pack and spring 450.00 Obo call Justin at 5419820006 or text thanks guys 
    • 0 replies
    • 187 views
  10. Justin added a post in a topic Looking for a 582 Cylinder   

    Joey there is a pretty good deal on eBay for two cylinders Pistons and the head for 695.00 free shipping it is a 582 grey head but cross hatching and everything looked really good 
    • 0
  11. Justin added a post in a topic Rotax 582 top end rebuild   

    Okay thanks I'm still kinda on the fence about what I should do exactly really just looking for advice 
    • 0
  12. Justin added a post in a topic Rotax 582 top end rebuild   

    Jim were is this shop located that did the work for you 
     
    • 0
  13. Justin added a post in a topic Rotax 582 top end rebuild   

    Well back piston is scored my eclip on needle In back carb vibrated and cut off one of he adjustment rings and leaned out back cylinder caught it in time no seizure but burnt the piston and scratched up the cylinder wall a little so was going to put new pistons and rings along with inspecting crank 
    • 0
  14. Justin added a topic in Two Strokes   

    Rotax 582 top end rebuild
    Hey guys just wanting to get some input on top end kits for rotax 582 any input would be greatly appreciated thanks like to hear what you know 
    • 8 replies
    • 382 views
  15. Justin added a post in a topic Please Input on rotax ricks rebuilds   

    Have any of you guys running 582 heard of the aeroteks rebuild kit top end 
    • 0