Barry Cole

Members
 View profile  See their activity

  • Content count

    201

  • Joined

  • Last visited


Everything posted by Barry Cole



  1. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Today I balanced the rudder and epoxied 3 more false ribs on the other wing. A second coat of poly on the false ribs. My used engine also showed up!






    • 0


  2. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Thanks for the picture Ron. I have posted to the group for more information. I think the ribs will need glued on first, then the glass wrap. Just need to get the ribs fitted right. I thought you said this kit was easy? Ha! And also I love the detailed manual;))
    • 0


  3. Barry Cole added a topic in Avid Magnum   

    Root rib to fuel tank fitment
    Hi guys,
    My next step is to install my fuel tanks and ribs. I was doing some test fitting and studying the manual (which is way wrong) and my problem is that the ribs don't fit over the spar and fuel tank because of the lip on the fuel tank. I am lined up with depressions in the tank. Thanks in advance!
     

    • 1 reply
    • 686 views


  4. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Thanks Ron! Also, the ribs do not fit over the tank, the fiberglass is too wide for the rib.  I will post a picture of that soon, but it looks like the rib will need to be cut or the tank ground down (ikes) to make it fit?
    • 0


  5. Barry Cole added a post in a topic WING LIGHTS, Cheap!   

    Still have any of these Ed?
    • 0


  6. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Today I installed one set of false ribs on one wing where the tip tanks would have gone and prepped the second wing for the same in the morning. Installed the angle braces to the outer ribs. Studied the build manual and confused myself even more............Does anyone know if there is a "root rib" ?   The plans show it labeled as such, but I think they are talking about the trailing rib that goes on the rear spar and glues onto the fuel tank?  Any pictures anybody has of this area and time of their build is appreciated



    • 0


  7. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Ed, I do have them. 
    • 0


  8. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Got back to work on the Magnum today. I worked on fabricating the trim tab for the rudder. Seems that the Avid factory decided to weld mine solid to the rudder, so I had to cut it off and weld it to a piece of 3/8" square tubing that I had to special order from ACS.....then fabricate an adjustment tab for the tab and install the hinge.  After that (which took most of the day) I started working on the wings again.  I epoxied in the tubes that will hold the 6 false ribs where the tip tanks would have went. Tomorrow I hope to Hysol in the false ribs.







    • 0


  9. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    BTW, fuel cost is the least expensive cost to flying, but gets the most attention because that is what we pull our wallets out for more often for;))
    • 3


  10. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    All,
    Gor the record, I will only be burning 100LL or 96 octane ethanol free Mogas. I have plenty of availability on both and no issues getting it in the future. I know different parts of the country have different available fuels. So, my post on ProSeal was just a thought to help whomever it could help. I have had plenty of experience with low octane ethanol fuel and have NO desire to use it in any aircraft in my future. So, my fiberglass tanks will be good to go!
    Barry
    • 1


  11. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Would Pro Seal sloshing the tanks work? Just a thought. 
    • 0


  12. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Yes, these are all fiberglass. What tank do you need? I will be selling my tip tanks, but they are 5 gallons. 
    • 0


  13. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    Yep, I saw that in the plans, and thanks for reminding me!
    • 0


  14. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Well, I have been starting on the wings, I am waiting on my landing gear before I can get much further with the fuselage.  I have made the false ribs to go where the tip tanks would have went (previous owner was going to install) and I am waiting for my tubing to come in to finish that.  Going to take a break for a while, my daughter is getting married this weekend! All for now.


    • 0


  15. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    Here are my completed ribs. Thanks guys!

    • 1


  16. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    Jim, that is exactly what I plan on doing. I just got home from a cabinet shop who gave me enough scrap to build the ribs.  Thanks!!
    • 0


  17. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    Ed,
    Thanks! I think I will do the false rib route. Quick and easy. 
    • 0


  18. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    The rest of the ribs are 12" on center. The 16" spacing is to fit the tip tank in. I think I will proceed with putting in the false ribs, way simpler. I'm not a structural engineer so I rely on other experienced builders advice ;))
    • 0


  19. Barry Cole added a post in a topic 2 Magnum center ribs needed   

    I wanted to put a full rib, the one that goes between the spars in. But after studying it more, I think I can just make some more nose rubs and put in and it will be fine. It is 16" between ribs out on the end. As long as it will be strong enough I'm okay with it. Any advise is welcomed. 
    • 0


  20. Barry Cole added a topic in Avid Magnum   

    2 Magnum center ribs needed
    Hi guys,
    I am going to eliminate the wing tip tanks on my wings, but to do this I need 2 more ribs. Any one got anything laying around that may work?
    Thanks Barry
     


    • 12 replies
    • 1,171 views


  21. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Good one! Also, take care of the ounces and the pounds take care of themselves!!!
    • 0


  22. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    No, I didn't install a parking brake, and I may regret it later.  My plan is to keep this as simple as possible saving as much weight as possible. Hopefully I can find a couple big rocks wherever I land to use for wheel chocks !!!
    Cool parking brake though!
    • 0


  23. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Yesterday I installed the baggage door, brake lines and balanced the elevator.








    • 2


  24. Barry Cole added a post in a topic Step 2, Build Magnum!!   

    Yes, in fact I did it last night! I used lead shot and silicone caulk.
    • 0


  25. Barry Cole added a post in a topic Pouring lead into the rudder??   

    Thanks for the advise on the lead shot!  That is exactly what I used and mixed with 100% silicon and it worked great.  It took 2.2lbs to balance the elevator.
    Barry

    • 1