-
Content count
38 -
Joined
-
Last visited
Everything posted by Shipl14
-
Shipl14 added a topic in Avidfoxflyers General Hangar
Supplied air respiratorIf anyone is interested, this is what I have come up with for a supplied air respirator system. It's an old SCBA mask I bought years ago for something else plus a leaf blower and a long vacuum hose. I got a speed control for the motor from Harbor Freight. I put a respirator filter cartidge in the line just in case the blower pulled in any vapors or whatever. The blower will be outside. The white and red valve is for bypass air, but really doesn't seem necessary. The filter restricts flow quite a bit. I've used it a little for some gluing, but haven't tried it with any Poly Fiber stuff yet. Seems fine so far, except it's a little clumsy dragging the hose around. I set the speed at just enough to keep the glass from fogging. The air coming in is kind of cold, but will be better in warmer weather. Actully, a little cool air could be nice in hot weather. I'm thinking of using helmet tear offs for the visor when I'm spraying paint.
- 0 replies
- 340 views
-
Shipl14 added a post in a topic Avid Trailer
So I'm thinking of towing nose first. Any reason not to? (Yes I know loading is easier tail first).
-
0
-
-
Shipl14 added a post in a topic Avid Trailer
When you guys tow tail first, do you brace the elevator/rudder with something?
-
0
-
-
Shipl14 added a post in a topic -40 rated zip ties
Why? Do it by the book
-
0
-
-
Shipl14 added a post in a topic 2019 Ski season
Very cool. Is that the approved attachment point for the bungees?
-
0
-
-
Shipl14 added a post in a topic Avid MK IV on barnstormers.
I'll check it out for everybody at my place. Shouldn't take more than a few months.
-
1
-
-
Shipl14 added a topic in Avidfoxflyers General Hangar
RespiratorI've been using an old cartridge style respirator while working with the Poly Fiber stuff. Still get quite a bit of vapors. I've got an old SCBA unit I'm considering modifying into a supplied air mask. I have a Craftsman oilless compressor and a regulator. Anybody tried anything like that?
- 0 replies
- 302 views
-
Shipl14 added a post in a topic Fiberglass wing tanks removal
Yes a heat gun. I cut up the tanks and used heat to separate the fiberglass from the spars. I left the outboard end of each tank in the wing for a rib because my new tanks were slightly shorter.
-
0
-
-
Shipl14 added a post in a topic Howdy all
Never heard of the flat bottom wing option. Anybody have info?
-
0
-
-
Shipl14 added a topic in Avidfoxflyers General Hangar
Pitot tube attachmentAnybody have good pics of a pitot tube attachment? Want something that can be attached after covering.
- 4 replies
- 1,031 views
-
Shipl14 added a post in a topic Fiberglass strut fairing POC
I talked to a local cabinet maker about having some fairings made. He said he could do it. Haven't heard back yet on the cost.
-
1
-
-
Shipl14 added a post in a topic Covering butt rib
I didn't change the rear parts of the original ribs, except one I replaced. I have clamped the flaperons to the ribtails. Looked fine. Book says don't drill and attach til after covering.
-
0
-
-
Shipl14 added a post in a topic Covering butt rib
TJay got any pics?
-
0
-
-
Shipl14 added a post in a topic Covering butt rib
Yes I assembled the tanks with the wings on the plane. The rear part of the wing ribs are original.
-
0
-
-
Shipl14 added a post in a topic Fiberglass strut fairing POC
On this same topic, what kind of wood was used in the original fairings? I think I'll just have some made.
-
0
-
-
Shipl14 added a topic in Avid Model IV
Covering butt ribMy Mk IV kit came with a wing tank "upgrade" set. The wing root end of the tanks has a flange about 1" deep (on the top only). I extended the bottom of the first rib with a 1/8" plywood strip with gussets glued to the tank. Now considering gluing in some vertical braces up to the top flange so I can stretch the fabric over the butt end of the wing. The fabric will not be glued to the tank except for the plywood rib strips. ( I glued in carbon fiber strips under the plywood for strength). Has anybody installed this type of tank? How did you do the fabric on the butt end?
- 9 replies
- 1,518 views
-
Shipl14 added a post in a topic Vertical rudder tube issue
Cracked tube or weld?
-
0
-
-
Shipl14 added a post in a topic home brewed nav lights
Paragraph (a) does say standard category airworthiness certificate
-
0
-
-
Shipl14 added a post in a topic New legs for the Avid
Someone have a diagram or photo of how to plumb in a parking brake? I assume the brake lines for both wheels would pass through a shutoff of some sort.
Never mind. I went and looked on Spruce. It's all there.
-
0
-
-
Shipl14 added a post in a topic Little Progress
Actually I had been considering modifying the rudder pedals to help keep my feet in the right spot.
-
0
-
-
Shipl14 added a topic in Avid Model IV
-
Shipl14 added a post in a topic Avid MK IV Parts for Sale
Like to see a photo of the turtle deck
-
0
-
-
Shipl14 added a topic in Avid Model IV
Few picsThought I'd show a couple of things I've been working on. Fuselage rotator for covering and a baggage pouch made of covering fabric. Pouch has sewn in aluminum tubes that will be strapped to frame tubing. I was thinking of getting backpack or tent material, but then thought of the covering. Seems extremely tough. Any thoughts? Also a couple of pieces I have started covering. I will be reinforcing the landing gear truss this week before I start covering the fuselage.
- 0 replies
- 892 views
-
Shipl14 added a post in a topic Huston! We have a problem!
Mine happens to be off
-
0
-
-
Shipl14 added a post in a topic Speed fairings
ak flyer. Main wing struts
-
1
-