-
Content count
160 -
Joined
-
Last visited
efil 01's Activity
-
efil 01 added a post in a topic Avid STOL airfoil -some calculations
hi turbo, yes i fly, have sent you e mail... i'll be pleased to talk about my mod and these numbers
-
0
-
-
efil 01 added a post in a topic wing spars for Europe
give a call at ULMtechnologie, they are in north france and have all tubes you want
-
1
-
-
efil 01 added a post in a topic Vote! Vote! Vote! Vote! Vote! Vote!
please, keep talk about our fantastic avid and kitfox planes and let politic far away this forum
-
7
-
-
efil 01 added a post in a topic Tiny Tach Autopsy
with a cylindre saw, i made a hole over battery location, changed battery and closed again with some tape.
then to keep good pression on the bottom, i scewed the tiny on panel with an aluminium plate;
15 YEAR old, and tiny start a new life
-
0
-
-
efil 01 added a topic in Avid fox flyers pics and vids
flying to my private stripyesterday, i left the large grass aerodrome to park my plane at his home
- 1 reply
- 871 views
-
efil 01 added a topic in Avidfoxflyers General Hangar
rigging flapshi, i rigged 3° down flap as manual said it, but a little something strange appears when i 'm going fast:
with the same trim position: i can get a 60mph level at 4700 rpm without touching stick, but plane become nose hvy when i go faster cruise...
is the little 3° down flap which is pitching the plane getting more efficiency with speed? do i try to get flaps up some degres in rigging ?
- 4 replies
- 636 views
-
efil 01 added a post in a topic Rotax 582 surging problem
i would try it without the air filter and see the carbs when rpm change is coming
-
0
-
-
efil 01 added a post in a topic best numbers for a 582
yes..
i wonder about the accuracy of my gauge because when i touch the outlet water tube, it seems hot enouth, will chek the outlet temp of water with an other instrument
i wonder too if the use of inox tubes doesn't refrech water more than classic tubes
Today i made a short flight with rubber on less than half radiator, and the temp was going 12O F cruizing
about egt's same question about accuracy , my plugs are brouwn like chocolate
-
0
-
-
efil 01 added a post in a topic best numbers for a 582
thx
i forgot to talk about water temp:
at the warm up, i reach the 130f
and in flight, the temp going down to 100/110 F range , is it too low?
i got the belly radiator, may be i need to mask it a bit
-
0
-
-
efil 01 added a topic in Avidfoxflyers General Hangar
best numbers for a 582hi all,
first i fly my new plane and still a joy, now i give my numbers:
climb at 60mph rpm 6400/6500 +1500ft/min low egt
cruise patern at 60 mph rpm 4700/4800 low egt
CRUISE at 80 mph rpm 5300 low egt
cruise 85 mph AT 5600 egt 1220/1230 f(max egt on rpm range)
i didn't calculate but have very low consuption at 5300
would it worth to go faster AT 5800/6000 ?
thank to give your input
- 6 replies
- 1,086 views
-
efil 01 added a topic in Avid fox flyers pics and vids
solo in my avid Cyesterday i made my first flight solo in my plane, so light! was level flight at 60 mph with 4700 rpm, under 30mph , the plane still wants to fly . and take off blocks the variometer needle up
i made some good landings and some bounces too, elevator autority keeps good even with idle landing but the flaps seem to be useless, making plane heavy in controls and no easy to flare the landing without power.
btw it is a real joy to fly this little bird, very happy
- 1 reply
- 755 views
-
efil 01 added a post in a topic flying !!
the guy ducked down is me, we switched seats after some rolls for the first flight
-
0
-
-
efil 01 added a post in a topic Manu's Avid C
fixed, but i wonder why in static full throttle at 6200 i was below max temp, and in take of, i went over for few minutes..
may be the reason was the engine did not flew for several years, will check that seriusly
thx
-
0
-
-
efil 01 added a post in a topic Manu's Avid C
sure but it is a 2 blade wood prop i can't pitch giving 6200 static, the firstl one was only 5000 rpm static, do i try it in air?
btw i cheked plugs today,: they are perfect chocolate color
about nose hvy, i forgot to say i had checked with joey file xls, the cg was at 13,4 with my "hvy" test pilot onboard in middle range
-
0
-
-
efil 01 added a post in a topic Manu's Avid C
hi
so i (we) made the first flight
with a friend (instructor pilot) we made some roll tests, and then a little jump; the plane was so sweet this little jump ended to a full flight straight up in sky.
climbing at 60 mph and 6600 rpm, full throttle, egt quickly jumped to 1300, when on floor full throttle, they never go over 1150; after release some pwr, they gone in the 1100 1200 range.
if some have some suggestion about that...
stall W/O flap 35 mph, 32 with flaps. very gentle ; parachuting without brake falling tendency. the plane is a bit nose hvy even with full trim. if turbo is still there he can say something perhaps.is it not too short?
i guess got a CG forward, but in landing i've got full control, the flap are not very needed
approach at 55 with 2 passengers is good,
for now, i feel my custom wing is a good choice
-
0
-