Reductions EA81 info needed

[EDMO 1078]

Just letting everyone know that Mr. Dave Johnson, owner of "Reductions" in Canada, passed away 22 Sept 2011.

I purchased a used EA81 with his reduction belt drive in 2003. I wrote to him trying to find out my ratio, where to get a new belt, and specs on washers and bolt torks on his engine mount. His wife just sent me a letter that he had passed away and the company is no longer in business.

If anyone can give me any of this info, I would appreciate a posting or call me afternoons CST.

Thanks, Ed in Missouri 314-753-8587

[IFMT 36]

Just letting everyone know that Mr. Dave Johnson, owner of "Reductions" in Canada, passed away 22 Sept 2011.

I purchased a used EA81 with his reduction belt drive in 2003. I wrote to him trying to find out my ratio, where to get a new belt, and specs on washers and bolt torks on his engine mount. His wife just sent me a letter that he had passed away and the company is no longer in business.

If anyone can give me any of this info, I would appreciate a posting or call me afternoons CST.

Thanks, Ed in Missouri 314-753-8587

If you have a warp drive prop contact warp drive with the serial number off the prop blade. They may have the ratio info. I replaced my blades and they had all the info on file from 2001. Check with an industrial belt supply like B.C. bearing in Canada for the cog belt.