Rotax 582 Crank Case Seal

[lv2plyguitar 172]

Does any know if rotax has recommended using any other type of case seal since the original recommendation of Loctite 574 when sealing the two crank case halves together.

What types have any of you used without any failer of the seal.

Thanks for your input.

[akflyer 1427]

Does any know if rotax has recommended using any other type of case seal since the original recommendation of Loctite 574 when sealing the two crank case halves together.

What types have any of you used without any failer of the seal.

Thanks for your input.

I use the permatex moto seal. That is what the local sled shops use for the engine build too. Have not had an issue with it failing... ever.

http://www.debrix.com/Permatex-Moto-Seal-1-Grey-Sealant-p/103-711-mw.htm

[akflyer 1427]

Jeff,

I sent you a PM, let me know if you got it.

[lv2plyguitar 172]

Jeff,

I sent you a PM, let me know if you got it.

:BC:/>/>

Great. Thank you very much. Good news is I got the motor apart. Still in new condition with no corrision after sitting 15 years. Got new seals on the way and look forward to getting it started.

Edited 7 Dec 2012 by Avid Heavy