Control linkage

[TreeTopAirways 10]

All,

I need to replace this part. It is located in the AFT Aileron Assembly.  It connects the main (aft) Aileron pivot arm to the push pull tube.  Any Help appreciated.

 

Thanks,

R Floyd

 

[Guest]

Do you have a photo of that part in place?

[High Country 69]

It would appear to me that one rod end with male threads threaded into another with female threads and a lock nut would have you going in no time. just an example this http://www.speedwaymotors.com/AFCO-10460-Standard-Steel-Heim-Rod-End-3-8-24-RH-Male,41021.html?utm_medium=CSE&utm_source=CSEGoogle&utm_campaign=CSEGOOGLE&CAWELAID=1268596625&CAGPSPN=pla&gclid=CPysz7jzvcECFcpzMgodABYAOw screwed into this http://www.speedwaymotors.com/AFCO-10462-Standard-Steel-Heim-Rod-End-3-8-24-RH-Female,41024.html with a lock nut to hold the position. 

Edited 21 Oct 2014 by High Country

[akflyer 1427]

High country nailed it.. its not subject to rotation so I dont see why it needs to be welded.  Is this on the top of the rod that connects to the flaperons?

 

[TreeTopAirways 10]

Akflyer,

Yes, it is on top of the rod that connects the flaperons.

 

High Country, thanks, parts are on order!

 

ChrisB, do not have a picture at the moment.

 

The part is broken right at the weld.

 

Thanks All!

Edited 21 Oct 2014 by TreeTopAirways