Looking for a 582 Cylinder

4 posts in this topic

Posted

Have a buddy looking for a cylinder for a Mod 90 582. Anybody have a parts engine laying around??

Share this post


Link to post
Share on other sites

Posted

Let me see what I can do. I'll ask for all of my parts back from my 582 / 670 transformation. It may be a couple weeks and it will need to be honed. It only has 20 hours in it though. 

Share this post


Link to post
Share on other sites

Posted

Joey there is a pretty good deal on eBay for two cylinders Pistons and the head for 695.00 free shipping it is a 582 grey head but cross hatching and everything looked really good 

Share this post


Link to post
Share on other sites

Posted

Skidoo 580 & 582 Snowmobile Cylinders are the same as 582UL Cylinders. The 583 was the same Bore & Stroke only used RAVE Valves. Skidoo 521/532UL & 580/582 is the same Cylinder Casting just different Sleeves & Bores, so you can put a New 580/582 Sleeve in the 521 Cylinder Casting. You can Over Bore most Stock Sleeves 2mm if you can find a Piston. You need minimum 2mm Wall Thickness, so Measure your Cylinder Sleeve OD, then minus 4mm and that's the largest it can be Bored. At one time there was a Big Bore Option for 580/582/583 and the 617 to 79.4mm, but I have seen them available for years now. Wiesco makes Custom Pistons.

Over Bore Options.

.25mm = .010"

.5mm = .020"

.75mm = .030"

1.00mm = .040"

1.25mm = .050"

1.5mm = .060"

1.75mm = .070"

2.00mm =.080"

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now