Warp drive spinner wanted!

[Ironman Al 35]

WTB, Warp Drive spinner, larger than the original, Id like to cover the bolts and base of the prop, its ground adjustable, if anyone has one sitting around let me know! Thanks! Al.

[EDMO 1078]

Al,  Some folks have said they use a skullcap spinner for the WD 3-blade prop - the size that goes over the mounting bolts, but still gives you access to the blade clamp bolts, so you don't have to remove spinner to adjust blades.  I have an unused uncut 12" diameter spinner with an undrilled backing plate, but don't know if that is what you need.  EDMO 

Edited 18 Feb 2017 by EDMO

[Av8r3400 1179]

The center hub bolts also need to be loosened to adjust the prop without damaging the blades, so a skull cap also needs to come off.  But taking it off is easy, one Allen screw.

Had a skull cap on the Warp on my yellow plane that now lives near WyPaul.

[Ironman Al 35]

Ed! Id be interested in that 12" spinner, give me a pm.

[EDMO 1078]

Here are 12" spinners I have for sale.  EDMO