Posted 18 Aug 2017 Want my Avid nearly ready for cover? I am ready to nearly give it away since no one wanted it with new Jab and digital instruments. Located in GA it is a model C produced in 90 or 91 but never finished. Serial number unknown. $4000 includes everything needed to finish it as well as tools, rolling wing rack, two sets of tires, 13 gallon tanks mounted in both wings, extended fuselage, fuel lines, stainless firewall, and a bunch more I can't remember since I am now on St. George Island, FL.Please contact me directly via email (brian.schoonmaker@gmail.com) since I know nothing of operating on a forum.Thanks 1 person likes this Share this post Link to post Share on other sites
Posted 18 Aug 2017 Sounds like a good deal for someone what model jabaru? Share this post Link to post Share on other sites
Posted 19 Aug 2017 Sounds like a good deal. I'd want to take a look but it is just to far away for me. Mike Share this post Link to post Share on other sites
Posted 19 Aug 2017 Jab is a 2200, zero time I purchased in 2013 Share this post Link to post Share on other sites
Posted 20 Aug 2017 (edited) If I didn't have so many $$$$ invested in my project and getting closer to completion I would already have sent a check to you. That's a Bargain. And, If I didn't have an engine I would be buying it to get that Jab anyway. Somebody should get this offer! Where is Lostman? EDMO Edited 20 Aug 2017 by EDMO Share this post Link to post Share on other sites
Posted 20 Aug 2017 Man that's only a few hour drive from my house . Share this post Link to post Share on other sites
Posted 20 Aug 2017 Believe me, my wheels are turning. If you were closer, it would be in my hangar right now. Just put another hour on my Avid MK IV with a Jabiru engine on it this evening. The Jab isn't a Rotax 912, but I think it has a 582 beat pretty easily. JImChuk Share this post Link to post Share on other sites
Posted 20 Aug 2017 That's true Steve. Just hop on 441 northbound. The house is on Deerfield Landing airport so it is a really quick flight too. 1 person likes this Share this post Link to post Share on other sites
Posted 20 Aug 2017 (edited) I would be on the way to Georgia to get that plane, but I think the divorce lawyers would not leave me anything here to come back to! Ha! EDMO Edited 20 Aug 2017 by EDMO Share this post Link to post Share on other sites
Posted 20 Aug 2017 That's a great deal. I am seriously interested. Originally I was planning to buy next year when I get my license, but this is almost too good a deal to pass by. I just send you a message. Share this post Link to post Share on other sites
Posted 20 Aug 2017 About 385 miles away . How come you aren't going to complete it ? Looks like you were doing a good job with it . If it's not my business no problem , just curious. I'm helping a guy right now that was on the edge of selling his project for a little bit . We went out did some work on it and now he's back into it . Share this post Link to post Share on other sites
Posted 20 Aug 2017 I moved from my airport home in GA to St. George Island, FL about a year and a half ago. All the houses here are on stilts with little if any storage so I can't complete it. No space. I did bring the engine, prop and instruments with me since I can store them here and I hope to find someone who wants them. They are currently for sale on Barnstormers.I originally had everything (aircraft, engine, prop and instruments) - a $35+K value for sale for $20K but got no takers so now I am going to piece it out. Check the photo below. I even built an under belly storage system which is part of the deal. Share this post Link to post Share on other sites
Posted 20 Aug 2017 (edited) I'm almost afraid to ask - How much for the engine? Prop? Send me a PM if you don't want to post it. I tried searching Barnstormers, but couldn't find the ad. EDMO Edited 21 Aug 2017 by EDMO Share this post Link to post Share on other sites
Posted 21 Aug 2017 $16k takes everything.i believe the Barnstormers ad says Jabiru For Sale Share this post Link to post Share on other sites
Posted 25 Aug 2017 Is this a Speedwing or a STOL wing? Interested in the airframe if it is a STOL or Heavy Hauler Share this post Link to post Share on other sites
Posted 26 Aug 2017 Heavy hauler wings with tanks and strobes. Share this post Link to post Share on other sites
Posted 9 Sep 2017 where are you and what do you want for the engine, mount and prop?Rick Share this post Link to post Share on other sites
Posted 9 Sep 2017 Don't expect a quick reply, Brian is in FL. Or perhaps more accurately, on his way out of FL thanks to Irma. Share this post Link to post Share on other sites
Posted 9 Sep 2017 He has an add on barnstormers for the engine where are you and what do you want for the engine, mount and prop?Rick Share this post Link to post Share on other sites
Posted 9 Sep 2017 (edited) where are you and what do you want for the engine, mount and prop?RickNot wanting to butt-in, but he is /was in Florida - I think he said $4K for plane, or $16K for all - To me, that would be $12K for FWF? Plane is not in FL, but engine was, so hope he finds a dry, high, place for it.... EDMO Edited 9 Sep 2017 by EDMO Share this post Link to post Share on other sites
Posted 9 Sep 2017 I know I made sure my hanger was straightened up and made sure my gantry was locked so my motor will stay about 4 ft off the ground . I'm sure he's keeping that motor safe that's a big investment compared to my little old 582gh Share this post Link to post Share on other sites
Posted 14 Sep 2017 Hey everyone I am back home on St. George Island after escaping to central Georgia. Funny thing is we lost power there but it only flickered here on the panhandle! Oh well, better safe than sorry.Lets talk airplanes and engines. Both are safe and dry. The airplane and associated goodies are in Eatonton, Ga. The engine, prop and instruments are here on St. George. I dragged it up the steps! I would really like to sell all so please contact me if you have a real interest.Thanks, Brian Share this post Link to post Share on other sites
Posted 21 Sep 2017 I finally checked the length of the Sensenich ground adjustable prop. It is 62".I have heard nothing from anyone about my engine, prop or airframe. Is it still priced too high? Make an offer! Share this post Link to post Share on other sites
Posted 5 Nov 2017 Anyone still out there following this topic? If so, you win because I just dropped the price again.Just $3000 takes my airframe, fabric, dope, glue, stitching thread, two sets of tires (different sizes), wheel pants, two cowls, tools, hardware, extra this and that, etc - you get the idea! There literally is much much more too. Want a work table on castors? That too.All you need is a truck or trailer to pick it up in central Georgia.Call Brian at 706-816-0383 Share this post Link to post Share on other sites