Right seat toe brakes

[Jwhetnall 3]

Hello

so I have the master cylinders already but will need the mechanical toe levers, so what do you think can a guy fab up these parts? It doesn't look to complicated.

and question for you that have installed these, was there any issues with teeing into the system?

regards Joe

[wypaul 448]

They need to be plumbed in series and how they are plumbed depends on which cylinders that you have.  You can use one set of the original MC-1's with the reserve built in  but the other set must be the remote reserve style (MC-4). MATCO has the drawings you need I think to get them plumbed correctly. 

http://www.matcomfg.com/MC4SeriesMasterCylinderTechnicalManual-idv-2420-23.html

if you want to use the MC-1's put them on the left and follow the plumbing thru the right MC-4's and then out to the brakes or vise verse.

I made a couple of sets of brake pedals and they are quite easy.  Follow the suggestions for proper geometry in the above Matco info.

[Jwhetnall 3]

Great info.  Thanks for the reply