IVO Magnum on a 582???

[NorthIdahoAvidflyer 374]

Found one of these for sale. Two blade 70 ". They said it would be good on a 582. Anyone familiar with these or have ran one on a 582? 

[1avidflyer 1983]

Will the bolt pattern fit the 582?  JImChuk

[NorthIdahoAvidflyer 374]

Will the bolt pattern fit the 582?  JImChuk

Not sure. Good question. It came off of a pusher 912. I assumed the bolt pattern would be the same.

[flywise 169]

Hey Northidahoflyer,

if it came off a pusher it will not work on a tractor configuration.....blades would be back to front. Hope that makes sense

[NorthIdahoAvidflyer 374]

Hey Northidahoflyer,

if it came off a pusher it will not work on a tractor configuration.....blades would be back to front. Hope that makes sense

 I was told by a propeller manufacture that the 912 pusher prop would work on the 582 in the tractor configuration. 

Here was their reference:

TWO-STROKES

         For all TWO-STROKE engines normally used with Ultralight/LSA:
                - PUSHERS with GEAR-boxes run a RIGHT turning prop
                - PUSHERS with BELT-drives run a LEFT turning prop
                - TRACTORS with GEAR-boxes run a LEFT turning prop
                - TRACTORS with BELT-drives run a RIGHT turning prop

     FOUR-STROKES

  The FOUR-STROKE engines (912, 912S & 914) turn opposite the two-stokes and are only available with GEAR-boxes...
                - PUSHERS run a LEFT turning prop
                - TRACTORS run a RIGHT turning prop

 

I know that the prop on my tractor 912 is a right (CW) tuning propeller and will not work on my tractor 582. My 582 takes a left (CCW) turning propeller. A 912 pusher propeller is also a left turning propeller. Do they have this wrong??

Thanks for the heads up. This would be a deal changer for sure...lol.

 

 

[lv2plyguitar 172]

I owned a magnum.  A rotax uls 100hp was not sufficient to turn that prop.  Would be a disaster on a 582.

[1avidflyer 1983]

912 pusher will work for a 582 tractor.  Still need to check the bolt pattern.  Was it possibly a medium instead of a magnum.  JImChuk

[flywise 169]

912 pusher will work for a 582 tractor.  Still need to check the bolt pattern.  Was it possibly a medium instead of a magnum.  JImChuk

I stand corrected .....thank you for shedding the light

[akflyer 1427]

I tried an ivo medium on the 582.  Not a fan of it at all.  Performance was way down versus the 3 blade ultralight prop.  Even in the 670 I tried it on we were not a fan.  

[chopndrag 226]

Hey Northidahoflyer,

if it came off a pusher it will not work on a tractor configuration.....blades would be back to front. Hope that makes sense

 I was told by a propeller manufacture that the 912 pusher prop would work on the 582 in the tractor configuration. 

Here was their reference:

TWO-STROKES

         For all TWO-STROKE engines normally used with Ultralight/LSA:
                - PUSHERS with GEAR-boxes run a RIGHT turning prop
                - PUSHERS with BELT-drives run a LEFT turning prop
                - TRACTORS with GEAR-boxes run a LEFT turning prop
                - TRACTORS with BELT-drives run a RIGHT turning prop

     FOUR-STROKES

  The FOUR-STROKE engines (912, 912S & 914) turn opposite the two-stokes and are only available with GEAR-boxes...
                - PUSHERS run a LEFT turning prop
                - TRACTORS run a RIGHT turning prop

 

I know that the prop on my tractor 912 is a right (CW) tuning propeller and will not work on my tractor 582. My 582 takes a left (CCW) turning propeller. A 912 pusher propeller is also a left turning propeller. Do they have this wrong??

Thanks for the heads up. This would be a deal changer for sure...lol.

 

 

Bite the bullet and get a warp drive 3 blade taper tip. I love it on my plane it has good pull and cruises nice.