tool

[efil 01 74]

hello, i can't see on manual what size of clecos i need?

For the fuselage building, what is the minimum number and size i must have?

sry for my stupid question, i'm new on cleco way of building

[akflyer 1427]

hello, i can't see on manual what size of clecos i need?

For the fuselage building, what is the minimum number and size i must have?

sry for my stupid question, i'm new on cleco way of building

About the only size I can think of would be 1/8" and about 35 or 40 should be plenty for doing the doors etc.

[dholly 718]

Direct from the Avid Flyer Mk-IV Builders Manual

TOOLS NEEDED:

1. 3/8 inch electric drill

2. #30 & #40 drill bits, #30 drill bit - 12" long

3. 3/32, 1/8, 1/4, 3/16, 5/16, 3/8, 9/16 drill bits

4. Clecos, approx (50)ea #30silver and #40bronze and Cleco pliers

5. Rivet gun

6. Assorted sandpaper

7. Straight edge

8. Level

9. 1/4, 3/8 inch socket set

10. (10) 3 inch hose clamps

11. Phillips and flat head screwdrivers

12. Clamps and clothes pins

13. Wire Brush

14. 5/16, 9/16 inch open-end wrenches

15. Sharp scissors

16. Household iron

17. Small rubber or plastic hammer

18. 1/4 inch rat tail file

19. Other assorted files

20. Brass drift

21. Needle-nose pliers

22. Hacksaw

23. Tin snips

24.Coping saw or jig saw

25. Sabre saw

26. Circle compass

27. 1/8 inch NPT tap

28. Bucking bar

29. Ball peen hammer

30. Reamers - 3/16, 1/4, 5/16 inch

31. 1-1/8 inch hole saw

32. Saw horses

33. Vise hammer

34. Hack saw

35. Plumb line

36. Inch/pound torque wrench

37. Spray gun and compressor

38. Nicopress tool

39. 5/8, 7/8, 1-1/8, 2-1/4 inch hole saws

SUPPLIES:

Felt tip pen

Straight pins

Pencil

Assorted sandpaper

Stranded packing tape

Masking tape and paper

Razor blades

Cardboard

Acetone

ADDITIONAL DESIRABLE TOOLS:

1. Drill press

2. Disc or belt sander

3. Access to sandblaster or shot-peen

4. Bubble protractor

5. High-speed grinder (porting tool)

6. Bench grinder

7. Band saw